🔗 Flow Connect
🧩 Puzzle · 35 playsFlow Connect
Connect every matching pair of colours and fill the whole board.
About Flow Connect
The wonderfully moreish flow puzzle. Draw a pipe between each pair of matching colours -- but there is a catch: your pipes cannot cross, and every single square must be filled when you are done. Levels grow from a gentle 5x5 to a tangled 9x9, and finding the one route that covers the whole grid is deeply satisfying.
How to Play
Drag from one coloured dot to its matching pair to lay a pipe. Pipes can't cross or overlap. Connect every colour AND cover every empty square to complete the level.
💡 Tips & Strategy
Solve the corners first -- a corner cell has only two neighbours, so the pipe passing through it is often forced.
Edges are the next most constrained. Trace along the border and you'll usually find pipes with only one legal path.
Remember the real constraint isn't just connecting colours -- it's filling every square. A short direct route that leaves gaps is wrong even if the colours match.
If two pipes are fighting for the same region, the longer forced one usually wins; reroute the flexible one around it.
What your finger actually does
Press on any coloured dot and drag. The pipe grows one square at a time, and only up, down, left or right; diagonals never count. If you swipe so fast that your finger skips a square, the pipe simply stops growing until you come back next to its tip, so on big boards a steady drag beats a quick flick.
Editing is built into the drag. Slide back over the square you just left and the pipe shrinks. Loop back onto an earlier part of the same pipe and everything after that point is cut off. Press a square in the middle of a finished pipe and it is trimmed to that spot, ready to be redrawn from there. Press one of its dots and the whole pipe restarts from that dot.
Pipes can never share a square, but you can still drag straight through another colour. Doing that chops the other pipe at the square you entered, deleting that square and everything beyond it. The one thing you cannot enter is a dot of a different colour.
Levels, board sizes and the two buttons
There is no clock, no move counter and no star rating. Your progress is the level number, and it is saved in this browser, so closing the tab does not cost you anything. Each level number always builds the same board, so yesterday’s puzzle waits in exactly the same shape today.
The ✕ button wipes every pipe and leaves the dots where they are. The ↻ button rebuilds the current level from scratch, which gives you the same puzzle again, not a new one. The Pipes counter in the top bar shows how many colours are joined, but it does not check for empty squares, so 5/5 is not the same as solved.
- Levels 1 to 4: 5x5 board, 4 to 7 colours.
- Levels 5 to 8: 6x6 board, 4 to 8 colours.
- Levels 9 to 12: 7x7 board, 4 to 9 colours.
A worked example: the six-square trap
Picture a 5x5 board with columns A to E and rows 1 to 5 from the top. Red sits at A1 and E3, yellow at D2 and A5, green at B3 and D3, and blue at B4 and B5, right next to each other.
Red runs along the top row and down the right edge: A1, B1, C1, D1, E1, E2, E3. Yellow goes left along row 2 and down the left edge: D2, C2, B2, A2, A3, A4, A5. Green is a short straight hop from B3 across to D3.
Now blue. The tempting move is one step from B4 to B5. The counter jumps to 4/4, and nothing happens, because C4, D4, E4, C5, D5 and E5 are still empty. The real blue pipe is a U: B4, C4, D4, E4, E5, D5, C5, B5. Two dots side by side are sometimes joined directly, but when that would leave squares stranded, they are the two ends of a long detour.
Mistakes that keep you stuck
Nearly every failed attempt comes down to one of these.
- Drawing the shortest route for every colour first. Short pipes leave scattered holes that nothing can reach later.
- Treating the counter as the finish line. The level only clears when every square is covered.
- Leaving a dead end. An empty square boxed in on three sides can only be filled by a pipe that ends there, and pipes only end on dots. If you create one, something upstream is wrong.
- Fixing a mistake by redrawing from scratch. Press the pipe at the last good square and continue from there instead.
- Ignoring untouched dots. A colour you have not drawn yet still needs a path, and your other pipes are usually blocking it.
Reading the board like a solver
Count the free neighbours of every empty square. A non-dot square needs exactly two pipe connections, one in and one out, so a square with only two open neighbours tells you precisely which way the pipe must pass through it. Chain those forced squares together and big parts of the board fill themselves in.
Hug the walls with long pipes. When a colour has dots far apart, routing it along the border uses up the awkward edge squares and leaves an open middle for the shorter pairs, where they have room to bend.
Watch for one-square-wide corridors. If a channel between two pipes is a single square wide, only one colour can travel down it, and it has to travel all the way. Decide early which colour owns it.
Use the cutting rule as an eraser. When you need room, drag your active pipe straight through the one in the way rather than trimming it separately. You can redraw the chopped pipe afterwards.
How Flow Connect differs from the classics
This style of puzzle comes from Numberlink, a pencil puzzle made famous by the Japanese publisher Nikoli, where you join matching numbers with lines that never cross. The phone game Flow Free by Big Duck Games turned the numbers into colours in 2012 and made the fill-every-square rule part of the challenge.
Flow Connect follows that modern rule set: no crossings, every square used. Unlike hand-built level packs, the early boards are generated by carving the whole grid into pipes and keeping only their end points as dots, so the intended answer is just one of possibly several. Any arrangement that joins all the colours and fills the grid counts.
Flow Connect FAQ
Why didn’t the level clear when all the colours were connected?
At least one square is still empty. Flow Connect only clears when every pair is joined and all squares on the board are covered. Find the gap, reroute the nearest pipe through it, and finish by dragging back into that pipe’s end dot, because the game checks for a win at the moment a pipe reaches its matching dot.
How are the boards built?
The game splits the full grid into pipes and keeps only their end points as dots. On the first twelve levels that means a complete solution exists for every board. Some boards have more than one, and any full solution wins.
Can I undo a move?
There is no undo button, but you rarely need one. Drag backwards to shrink a pipe, press any square of a pipe to trim it to that point, or press ✕ to clear every pipe and start the level over.
Does the ↻ button skip to a new puzzle?
No. It rebuilds the level you are on, and each level number always produces the same board. The only way forward is to solve it.
How big do the boards get?
Levels 1 to 4 use a 5x5 board, levels 5 to 8 a 6x6 board and levels 9 to 12 a 7x7 board. The colour count rises with the board, from four to seven pairs on 5x5 up to nine pairs on 7x7.
Will I lose my level if I close the page?
No. Your current level is saved in your browser on this device and comes back when you return. Clearing your browser data or switching to another device starts you at level 1.