💡 Light Switch
🧩 Puzzle · 50 playsLight Switch
Turn off every light -- but each tap flips its neighbours too.
About Light Switch
The classic light-toggle puzzle. Tap a light and it flips itself and its four neighbours on or off. The whole board starts lit and your job is to switch everything off. It sounds simple until the flips cascade -- solving it takes real planning, and beating par is a genuine badge of honour.
How to Play
Tap any light to toggle it AND its up/down/left/right neighbours. Turn every light off to win. Beat the par move count for a perfect score. Levels get trickier as you go.
💡 Tips & Strategy
Order doesn't matter and tapping a cell twice cancels out -- so the solution is just a specific SET of cells to press once each.
Use chasing the lights: go row by row from the top, and whenever a light is on, press the cell directly BELOW it. Repeat down the board.
After chasing, if the bottom row still has lights, the pattern there tells you which top-row cells to press first -- then chase again.
Once you learn the handful of bottom-row patterns, you can solve any board in near-par moves.
What one tap really does
The board is a 5 by 5 grid of 25 lights. Tap any cell and it flips, along with the cells directly above, below, left and right of it. Diagonals are never touched. Where a cell sits changes how much it moves: a corner tap flips 3 lights, an edge tap flips 4, and any of the nine inner cells flips 5.
Each level starts with a scattered pattern lit up. That pattern is built by secretly pressing a set of different cells on a blank board, so every level is guaranteed to have a solution. The level is cleared the instant the last light goes out.
Two properties make the puzzle crackable. Order never matters, because the same set of taps gives the same result whichever way round you press them. And tapping a cell twice is the same as never tapping it. So a solution is really a list of cells to press once each, and any cell you have pressed twice is a wasted pair of moves.
Par, levels and the retry button
There is no timer, no lives and no score beyond the level counter, so the only pressure is the Par number in the top bar. Par is the number of hidden presses used to build the board: 3 on level 1, rising by one every two levels (4 on levels 2 and 3, 5 on levels 4 and 5, and so on) until it caps at 14 from level 22 onward.
Finish in par moves or fewer and you get the Perfect star. Finish over par and you still advance; the game just shows Lights out instead. Your level is saved in this browser, so you can close the tab and pick up where you left off.
There is no undo. The retry arrow resets the move counter and puts back exactly the same board, because each level’s layout is fixed. That makes retry your undo: if you have tapped your way into a mess, reset and replay what you have learned rather than digging deeper.
Worked example: level 1, step by step
Number rows 1 to 5 from the top and columns 1 to 5 from the left. Level 1 opens with five lights on: row 1 column 5, row 3 columns 3 and 5, and row 4 columns 4 and 5. Par is 3.
Work top-down. The only light in row 1 is in column 5, so tap the cell directly beneath it, row 2 column 5. That clears the row 1 light but switches on row 2 columns 4 and 5 and turns off row 3 column 5. Row 1 is now dark for good.
Row 2 now has lights in columns 4 and 5, so tap the two cells below them: row 3 column 4, then row 3 column 5. The first leaves a T of four lights against the right edge, exactly the footprint of an edge tap, and the second wipes the board clean. Three taps, par matched, Perfect.
The bottom-row lookup table
That top-down sweep is the classic light-chasing method: for each row from the top, tap beneath every lit cell. It always clears rows 1 to 4, but sometimes a few lights survive on row 5. On a 5 by 5 board there are only seven leftover patterns you can meet, and each has a known fix.
Read the leftover row 5 from left to right (1 means lit), tap the listed row 1 cells on your current board, then chase again from the top. The board will finish clean.
- 1 0 0 0 1: tap row 1 columns 1 and 2.
- 0 1 0 1 0: tap row 1 columns 1 and 4.
- 1 1 1 0 0: tap row 1 column 2.
- 0 0 1 1 1: tap row 1 column 4.
- 1 0 1 1 0: tap row 1 column 5.
- 0 1 1 0 1: tap row 1 column 1.
- 1 1 0 1 1: tap row 1 column 3.
Mistakes that blow your par
Chasing always works, but it is rarely the shortest path. Watch for these habits if your stars are drying up.
- Tapping the lit cell itself. Usually you want to tap next to a light, not on it, because tapping on it also lights up its dark neighbours.
- Undoing by tapping again. Re-tapping a cell cancels it but still costs a move; two wasted moves per mistake adds up fast against a par of 6 or 7.
- Chasing blind on low levels. On levels 1 to 15 par is exactly the minimum, so look for the plus shapes first. A tight cross of five lights is a single tap on its centre.
- Ignoring edges. A lit corner plus its two neighbours is one corner tap. Three in a row along an edge with the middle one sticking out is one edge tap.
Advanced: reading the board backwards
Since every board is just a set of presses, the strongest players reverse-engineer it. Look for the distinctive footprints: a full five-light cross means an inner press, a T of four means an edge press, an L of three means a corner press. Where two footprints overlap, the shared lights cancel out and go dark, so a gap in the middle of a shape is a strong hint that two presses touch there.
Peel off the clearest footprint, tap its centre, and the rest of the board usually gets simpler. When nothing obvious stands out, fall back to chasing plus the lookup table; it costs a few extra moves but never fails.
Every solvable 5 by 5 board actually has four different winning press-sets, which is why par can sometimes be beaten. We checked the later levels: on several boards from level 16 up, the true minimum is below par, for example level 20 has a par of 13 but can be cleared in 9.
Light Switch FAQ
Is every Light Switch level solvable?
Yes, on Funzigo. Each board is created by pressing real cells on a blank grid, so pressing those same cells again turns it off. That matters, because if you lit up a random pattern of 25 lights, only about one in four would be solvable on a 5 by 5 board.
What is the fastest way to solve Light Switch?
Chase the lights down the board (tap under every lit cell, row by row), then use the seven-pattern bottom-row table to choose your row 1 taps and chase again. It solves any board here, though spotting press footprints directly gets you closer to par.
Does the order of taps matter?
No. The same set of taps gives the same final board in any order, and a cell tapped twice is the same as not tapped at all. Only which cells you press an odd number of times counts.
What is the most taps a 5 by 5 board can need?
No solvable 5 by 5 position needs more than 15 presses with perfect play. Funzigo’s levels stop growing at a par of 14, so even the hardest ones here sit just under that ceiling.
What happens if I go over par?
Nothing bad. You still move on to the next level; you just miss the Perfect star. Hit retry before the last tap if you want another go at the same board.
Where does this lights puzzle come from?
The toggle-the-lights puzzle became popular as a handheld electronic toy in the mid-1990s, with a 5 by 5 grid of lit buttons. It has since become a favourite example in recreational maths, because the puzzle can be solved with linear algebra over just two values, on and off.